Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function User Manual download pdf (Page 64)

62 Rockwell Automation Publication 7000-UM201B-EN-P - June 2013

Chapter 4 Drive Terminal Application

Control Panel

The terminal can control the operation of the drive from a remote location.

These functions mimic those which can be found on the drive door if supplied.

The available functions are:

• Stop

• Start

• Reset

• Reverse

• Reference Setpoint

Indications of the drive status are:

• Ready

• Running

• Faulted

• Wa rn i n g

• Reverse

• Frequency Reference

The Control Panel is displayed by pressing the Status Bar on the bottom of any

screen and is typical of Figure 62

Figure 62 - Control Panel

The control panel remains open as its own window while other screens are being

used. While the panel is active, the terminal must maintain contact with the

drive, or the drive will be react based on the “NetSrvr FltAct’n (HMI Interface

Board Fault Action) parameter #879.

The Control Panel can be closed when not required without affecting the

operation of the drive. Pressing the Status Bar opens and activates the window.

IMPORTANT

The top of the Control Panel shows the Drive Name and the Drive’s IP address.

This is critical information when the PC hardware is running more then one

terminal application to different drives.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 89 90

No comments

Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function User Manual Page 64