Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function User Manual download pdf (Page 62)

60 Rockwell Automation Publication 7000-UM201B-EN-P - June 2013

Chapter 4 Drive Terminal Application

2. To set the time, click on the hours:minute:seconds field and enter the

desired value using a keyboard or the Soft Keypad Icon.

To change the date, select the pulldown menu and select the new date

using a keyboard or the Soft Keypad Icon.

3. Press Accept to change the value in the drive.

Display Drive Revision Levels

The center panel shows a tree view of all the modules within the drive and the

associated revisions of each of the modules. The tree can be expanded or

collapsed by clicking on the ‘+’ symbol.

Save and Restore Parameters

Parameters are stored and retrieved from either internal NVRAM or any external

file accessible by the terminal.

NVRAM Operations

Operations are carried out on the NVRAM within the drive by pressing the

‘NVRAM’ button. A list of operations can then be selected from:

• Init – Set all parameter values in the drive to their default values.

• Load – Transfer the saved parameters from the drive’s NVRAM into the

working RAM.

• Save – Transfer the current working RAM set of parameters to NVRAM.

Parameter Set Operations

The complete set of parameters can be stored and retrieved from any media

accessible by the terminal. The operation is carried out by pressing the ‘Transfer’

button, resulting in two operations:

• Drive to File – upload the parameters from the drive to a file.

• File to Drive – download the parameters previously saved in a file to the

drive.

In both cases, a dialog will open allowing the file to be selected. The file extension

is .CSF which is the same file format used by low voltage drive tools (i.e. Drive

Tools, Drive Explorer) to store parameter files.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 89 90

No comments

Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function User Manual Page 62