Rockwell-automation Migrating PanelView Enhanced Terminal Applications User Manual download pdf (Page 71)

Publication 2711P-QS001A-EN-P - October 2007 71

Review Unsupported Features and Implement Workarounds for Migration Issues Chapter 6

Configure the Set Bit Cursor Point ActiveX Control

Follow these steps to configure the set bit cursor ActiveX control.

1. Double-click the ActiveX

control.

2. Click the Connections tab.

3. Assign a tag or expression

to the Select, Index, and

SBCP connections.

The table defines each

connection.

4. Click OK when done.

Connection Connection type Description

Select Read A zero to non-zero transition activates the control.

• If the value of the Index connection matches an assigned SBCP

connection, the Select connection is set to 1.

• The control becomes inactive if the value of the connection is zero.

This is a required connection.

Index Read The tag assigned to this connection is typically an integer. Set the initial value

to 1. The ActiveX control will mimic behavior similar to the PanelView ‘e’

terminal, which is to select the first item when the control is used the first

time.

A Ramp button pair is typically assigned to the Index connection with the

limits based on the number of cursor points on the display.

This is a required connection.

SBCP Read/Write The SBCP connections are named SBCP1 through SBCP100. Each represents a

value control of the set bit cursor point object in the PanelView ‘e’ terminal.

The SBCP ActiveX control writes either a 0 or 1 to the SBCP connections. Only

one SBCP connection can be set to 1 at a time.

The value of the Index property determines which SBCP connection to set to

1. If the Index connection is set to 1, then SBCP1 is set to 1 and all others are

set to 0.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 159 160

No comments

Rockwell-automation Migrating PanelView Enhanced Terminal Applications User Manual Page 71