Rockwell-automation 2711PC-xxxx PanelView Plus Compact User Manual User Manual download pdf (Page 55)

Publication 2711PC-UM001A-EN-P - March 2009 55

Configuring the Terminal Chapter 4

Configure Keypad Settings for the Terminal

You can restrict multiple or simultaneous key presses on the keypad

of your terminal.

1. Select Terminal Settings>Input Devices>Keypad.

2. Press the Single Key Mode button to select a key option.

• If Enabled, any programmable key that is pressed inhibits all

keys until the programmable key is pressed again. This

includes the Alt, Ctrl, Shift keys.

• If Enabled with Abort, any secondary key press will terminate

the initial key press immediately.

• If Disabled, there are no restrictions on key presses. This is

the default.

3. Press the Hold Off Time button to enter the length of time, in

seconds, to ignore multiple presses of the same key.

4. Press OK when done.

Configure the Sensitivity of the Mouse

You can set and test the sensitivity for both the speed and physical

distance between mouse clicks. The process is identical to setting the

double-tap sensitivity for the touch screen.

To set the mouse sensitivity, select Terminal Settings>Input

Devices>Mouse.

IMPORTANT

The keypad cannot produce Home, End, Page Up or Page

Down when Single Key mode is enabled.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 131 132

Comments to this Manuals

No comments