Rockwell-automation MPAS Integrated Linear Stages User Manual download pdf (Page 59)

Rockwell Automation Publication MP-UM001D-EN-P - September 2013 59

Maintenance Chapter 7

7. Remove the clamp.

8. Reinstall the protective caps on all the lubrication ports.

Strip Seal Cleaning

Clean the strip seals, if installed, by using a lint free cloth lightly saturated with

isopropyl alcohol.

Refer to the Strip Seal Removal on page 63

and Strip Seal Replacement on

page 64 when performing this task.

Cover Cleaning

Clean the covers at the same time you clean the strip seals. Use pressurized air and

a lint free cloth lightly saturated with isopropyl alcohol to remove any dirt or

grease.

IMPORTANT

Replace the strip seal if it cannot be cleaned, or if an uneven or scored surface is

detected during cleaning.

A buildup of foreign material on the strip seal degrades the performance of the

linear stage. This buildup coupled with rapid movement of the carrier and the

resulting friction scores the surface and create a burnished appearance on the

strip seal.

Elements contributing to a typical buildup on the strip seals are dust, grease,

and other contaminants normally encountered in any operating environment

that is not strictly controlled.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 111 112

No comments

Rockwell-automation MPAS Integrated Linear Stages User Manual Page 59