Rockwell Automation 1785 PLC-5 User Manual Page 121
- Page / 172
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Troubleshooting
General Problems 5-1
Enhanced, Ethernet,
and ControlNet PLC-5
processors only
Troubleshooting – Enhanced, Ethernet, and ControlNet
PLC-5 Processor General Problems
☞
Indicator Color Description Probable Cause Recommended Action
PROC green
(steady)
processor in RUN mode
and fully operational
normal operation none
green
(blinking)
processor memory being
transferred to EEPROM
normal operation none
red
(blinking)
major fault run-time error Check major fault bit in status file (S:11) for error
definition. Clear fault bit, correct problem, and return
to RUN mode.
red
(steady)
major fault • user RAM has
checksum error
• memory module error
•
internal diagnostics
have failed
• Clear memory and reload program
• Check backplane switch settings and/or insert
correct memory module
• Power down, reseat processor and power up.
Then, clear memory and reload your program.
Replace EEPROM with new program. Then, if
necessary, replace the processor.
BATT
PROC
FORCE
COMM
PROG
RUN
R
E
M
- Quick Reference 1
- Conventions 4
- Front Panel – Enhanced 5
- PLC-5 Processors 5
- Hardware Components 6
- Front Panel – Ethernet 7
- ControlNet PLC-5 Processors 8
- Front Panel – Classic 9
- Comparison Chart for 10
- PLC-5 Family Processors 10
- Processor Comparison 1-7 11
- Any mix of I/O 11
- Processor Comparison 1-8 12
- Any mix of I/O 12
- Processor Comparison 1-9 13
- Processors 14
- Power Supply Modules 1-11 15
- Power Supplies 1-12 16
- Front Panel Keyswitch 17
- Processor Status File 18
- Processor Status File 1-15 19
- Processor Status File 1-16 20
- Processor Status File 1-17 21
- Processor Status File 1-18 22
- Processor Status File 1-19 23
- Processor Status File 1-20 24
- Processor Status File 1-21 25
- Processor Status File 1-22 26
- Processor Status File 1-23 27
- S:25 Reserved 28
- Processor Status File 1-25 29
- Processor Status File 1-26 30
- Processor Status File 1-27 31
- Processor Status File 1-28 32
- I/O Status File Format 33
- I/O Status File 1-30 34
- I/O Status File 1-31 35
- Addressing Data Table Files 37
- Data Table Files 2-2 38
- Data Table Files 2-3 39
- PLC-5 Memory 39
- Data Table 39
- Program Files 40
- I/O Image Addressing 41
- Logical Addressing 42
- Addressing 43
- N[N7:0] file number 43
- N7:[C5:7.ACC] element number 43
- B3:/[I:017] bit number 43
- I/O Addressing Modes 44
- Addressing Concept Summary 44
- Status Bits 3-1 45
- Relay Instructions 46
- Relay 3-3 47
- Relay 3-4 48
- Timer Instructions 49
- Timer 3-6 50
- Counter Instructions 51
- Counter 3-8 52
- Compare Instructions 53
- Compare 3-10 54
- Compare 3-11 55
- Compute Instructions 56
- Compute 3-13 57
- Compute 3-14 58
- Compute 3-15 59
- Compute 3-16 60
- Compute 3-17 61
- Compute 3-18 62
- Compute 3-19 63
- Compute 3-20 64
- Compute 3-21 65
- Logical Instructions 66
- Logical 3-23 67
- Conversion Instructions 68
- Conversion 3-25 69
- Bit Modify and Move 3-26 70
- Bit Modify and Move 3-27 71
- File Instructions 72
- File Instructions 3-29 73
- Diagnostic Instructions 74
- Diagnostic 3-31 75
- Shift Register Instructions 76
- Shift Register 3-33 77
- Shift Register 3-34 78
- Sequencer Instructions 79
- Program Control Instructions 80
- Program Control 3-37 81
- Program Control 3-38 82
- Program Control 3-39 83
- Program Control 3-40 84
- Processor and Message 3-41 85
- Processor and Message 3-42 86
- Block and 87
- ControlNet 87
- Transfer Instructions 87
- Block Transfer 3-44 88
- Block Transfer 3-45 89
- Block Transfer 3-46 90
- ASCII Instructions 91
- ASCII Instructions 3-48 92
- ASCII Instructions 3-49 93
- ASCII Instructions 3-50 94
- ASCII Instructions 3-51 95
- ASCII Instructions 3-52 96
- Pressed in at bottom 100
- Open (OFF) 100
- Pressed in at top 100
- Closed (ON) 100
- Complementary I/O 4-5 101
- To select: Set switch: To: 103
- Switch Settings 103
- Side View 104
- Ethernet Configuration 106
- NET ADDRESS 107
- Network address 01 107
- Switch Assembly 108
- Classic PLC-5 109
- Switch Assembly 2 4-15 111
- Remote I/O Rack Number 112
- Scanner Module, or VME System 112
- Switch Assembly 2 113
- I/O Rack Number 4-18 114
- (8-word groups) 115
- I/O Rack Number 4-20 116
- I/O Rack Number 4-22 118
- General Problems 5-1 121
- Enhanced, Ethernet 121
- General Problems 5-2 122
- Communication Channel 5-3 123
- Communication Channel 5-4 124
- Communication Channel 5-5 125
- Communication Channel 5-6 126
- Ethernet 5-7 127
- Ethernet PLC-5 127
- Status Indicators 128
- ControlNet 5-9 129
- ControlNet PLC-5 129
- ControlNet 5-10 130
- ControlNet 5-11 131
- General Problems 5-12 132
- General Problems 5-13 133
- Adapter Mode 5-14 134
- Scanner Mode 5-15 135
- Scanner Mode 5-16 136
- I/O RACK 137
- A B 148
- Extended Local I/O 5-29 149
- 1771 I/O ControlNet 149
- Extended Local I/O 5-30 150
- ControlNet I/O Status 150
- Extended Local I/O 5-31 151
- Extended Local I/O 5-32 152
- Extended Local I/O 5-33 153
- Extended Local I/O 5-34 154
- Error Messages 155
- Extended Local I/O 5-36 156
- ControlNet Errors 156
- Extended Local I/O 5-37 157
- Extended Local I/O 5-38 158
- Extended Local I/O 5-39 159
- Extended Local I/O 5-40 160
- Extended Local I/O 5-41 161
- Extended Local I/O 5-42 162
- Extended Local I/O 5-43 163
- Extended Local I/O 5-44 164
- Troubleshooting 165
- Additional Major Fault Codes 166
- ControlNet processor 166
- Extended Local I/O 5-47 167
- Fault Codes 167
- Extended Local I/O 5-48 168
- Extended Local I/O 5-49 169
- Extended Local I/O 5-50 170
Related products and manuals for Recording Equipment Rockwell Automation 1785 PLC-5
(54 pages)
(63 pages)© 2020, manymanuals.com. All rights reserved. | 0.909 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals